From uncertaintyto stability
Matched pair of resistance thermometers, PRTDM 201
Matched pair of resistance thermometers, PRTDM 201
These units are designed for temperature difference measurement, and also for heat carrier temperature measurement in heat meters and other heat energy control units in open and close heat supply systems.
mounting elements are designed for nominal (rated) pressure 1.0 MPa
response time does not exceed
16 s – for insertion part diameter equal to 6,0 mm;
20 s – for insertion part diameter equal to 8,0 mm
protection sheath material S10 – steel 12Cr18Ni10Т
|
Type of |
Type of TC |
TC tolerance |
temperature difference |
operating temperature |
PRTDM |
100P, Pt100, Pt500 |
А, В |
3 to 155 |
0 to 160 |
Insertion length L: 80, 100, 120, 160, 200, 250, 320 mm.
Extension lead length lshould be selected within the range: 2000; 3150; 5000; 8000 mm
Type |
Design |
Fitting |
Type of TC |
Cl |
Diameter |
Insertion |
||
|
modification |
typical |
min |
max |
|||||
|
PRTDM |
201 |
-010 |
М12х1.5, |
100P, Pt100, Pt500 |
А4, В4, В2 |
6.0 |
80 |
320 |
|
202 |
-064 |
А4, В4 |
4, 6, 8, 10 |
|||||
* – see Appendix for version description.
PRTDM 20х-ХХХ- ХХХ - TC - Cl. -d - L ( /l)
PRTDM 201-010 - G1/2" - 100P - В4 - 6 - 320 – matched pair of platinum resistance thermometers, modification 201-010 with polymeric terminal head, threaded fixed fitting G1/2", calibration 100P, TC tolerance class В, 4-wire configuration, outer diameter 6 mm, insertion length 320 mm.
PRTDM 202-064 - М16 - Pt100 - В4 - 6 - 320/2000 – matched pair of platinum resistance thermometers, modification 202-064 with extension lead in PTFE insulation threaded mounting fitting М16х2, calibration Pt100, TC tolerance class В, 4-wire configuration, outer diameter 6 mm, insertion length 320 mm, extension lead 2000 mm.
At the time of order it is recommended to specify actual minimum heat carrier operating temperature and minimum measuring temperature difference.